Descargar Imprimir esta página

Publicidad

Enlaces rápidos

TECHNICAL DATA
MODEL
SKU
INPUT VOLTAGE
POWER FREQUENCY
AMBIENT LIGHT
TIME DELAY
RATED LOAD
DETECTION RANGE
DETECTION DISTANCE
WORKING TEMPERATURE
WORKING HUMIDITY
INSTALLING HEIGHT
POWER CONSUMPTION
DETECTION MOTION SPEED
CUT-OUT SIZE
INTRODUCTION & WARRANTY
Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before
starting the installing and keep this manual handy for future reference. If you have any another query, please contact our dealer
or local vendor from whom you have purchased the product. They are trained and ready to serve you at the best.The warranty
is valid for 2 years from the date of purchase. The warranty does not apply to damage caused by incorrect installation or abnor-
mal wear and tear. The company gives no warranty against damage to any surface due to incorrect removal and installation of
the product. This product is warranted for manufacturing defects only.
FUNCTION
• Can identify day and night: The consumer can adjust working state in di erent
ambient light. It can work in the daytime and at night when it is adjusted on the
"sun" position (max). It can work in the ambient light less than 3LUX when it is
adjusted on the "3" position (min). As for the adjustment pattern, please refer to the
testing pattern.
• Time-Delay is added continually: When it receives the second induction signals
within the first induction, it will restart to time from the moment.
INSTALLATION ADVICE
As the detector responds to changes in temperature, avoid the following situations:
• Avoid pointing the detector towards objects with highly reflective surfaces, such as mirrors etc.
• Avoid mounting the detector near heat sources, such as heating vents, air conditioning units, light etc.
• Avoid pointing the detector towards objects that may move in the wind, such as curtains, tall plants etc.
INSTRUCTION MANUAL
INFRARED SENSOR
VT-8051
1356
220-240V/AC
50/60Hz
<3-2000LUX (adjustable)
Min.10sec±3sec
Max. 15min±2min
1200W (Traditional Lighting)
300W (LED Lighting)
360°
6m max(<24°C)
-20~+40°C
<93%RH
2.2-4M
Approx 0.5W
0.6-1.5m/s
Ø61.5mm
Good sensitivity
Poor sensitivity

Publicidad

loading

Resumen de contenidos para V-TAC VT-8051

  • Página 1 INTRODUCTION & WARRANTY Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installing and keep this manual handy for future reference. If you have any another query, please contact our dealer or local vendor from whom you have purchased the product.
  • Página 2 INSTALLATION • Unload the transparent vinyl cover which is at the bottom of the sensor. • Loose the screws in the connection terminal, and then connect the power to connection terminal of sensor according to connection-wire diagram. • Install back the transparent vinyl cover into the original location. •...
  • Página 3 INTRODUCTION & GARANTIE UVOD I JAMSTVO Merci d’avoir choisi et acheté un produit à V-TAC. V-TAC vous offrira le meilleur. Hvala vam, što ste odabrali i kupili tvrtke Vi-Tek (V-TAC). Vi-Tek (V-TAC) će vam Veuillez lire attentivement ces instructions avant de commencer l’installation et poslužiti na najbolji mogući način.
  • Página 4 αυτόματης λειτουργίας μετά από 8 ώρες. In case of any query/issue with the product, please reach out to us at: support@v-tac.eu For More products range, inquiry please contact our distributor or nearest dealers. V-TAC EUROPE LTD. Bulgaria, Plovdiv 4000, bul.L.Karavelow 9B...

Este manual también es adecuado para:

1356