Trilux LIVELINK Instrucciones De Montaje página 3

LIGHTGRID CONTROLLER
Produktbeschreibung
Dieses Modul ist ein Steuergerät für Mixed White
Beleuchtungssysteme mit bidirektionaler Steuerung.
Es bietet Anschlussmöglichkeit für 32 DALI-Lasten
(Betriebsgeräte) sowie für zwei externe Taster und
bis zu 3 Sensoren.
TECHNISCHE DATEN
Eingangsspannung
Eingangsstrom
(Nominal)
Eingangsfrequenz
Batterie
DALI Strom
DALI Teilnehmer
(Stand Alone Betrieb)
Leitungslängen DALI
Umgebungstemperatur
ta
Typ. TC Punkt (max.)
Luftfeuchte
Tastereingang
Leitungslänge L
Anschlussart
Lebensdauer
Normen
4 | 32
10262844 | 221017 | © trilux.com
220-240 VAC
50 mA
50/60 Hz
Lithium Knopfzelle
CR1632 3V
64 mA
max. 32
max. 300 m
-10 ... +50°C
+65°C
1 ... 90% r.F. nicht
kondensierend
220-240 VAC
max. 50 m
Steckklemme 0,5-
1,5mm² starr/flexibel
>50.000 h
EN 55015,
EN 61547,
EN 41347-1,
EN 41347-11,
EN 55032,
EN 55024
jeweils aktuellste
Ausgaben
LIGHTGRID CONTROLLER
EN
For your safety
Read all instructions and mounting steps carefully.
Keep the instructions for maintenance or disassembly
work.
Explanation of the warning levels
Observe and follow the warnings. Non-observance of
the warnings may lead to injuries or material damage!
WARNING! Indicates dangers which can
result in serious and/or fatal injuries.
CAUTION! Indicates dangers which can result
in injuries or health hazards.
NOTICE. Indicates dangers which
can result in material damage or malfunc-
tions.
TIP. Indicates information containing advice
or a useful note.
Explanation of warning messages and
instructional pictograms
WARNING! The electrical connection must be
carried out by professional personnel who are
trained and authorised.
WARNING! The assembly must be carried out
by professional personnel who are trained and
authorised.
WARNING! Risk of electric shock!
Never work with electrical voltage applied.
Safety instructions and safety labels
Electronic control gear units (ECG)
A neutral conductor interruption in the three-
phase circuit leads to overvoltage damage in
the lighting system. Only open the neutral conductor
isolating terminal in de-energised state, and close the
neutral conductor isolating terminal before switching
on again. Do not exceed the maximum permissible
ambient temperature ta of the luminaire. Exceeding
this limit reduces the service life and in extreme cases
© trilux.com | 221017 |10262844
5 | 32