Costway JH10021 Instrucciones De Montaje página 5

Your rollator is equipped with
various components, you
should know these
components and parts before
proceeding to read this user
manual. Design and
specifications could be
changed without further
notices.
• SPECIFICATION
Overall width 63 cm
Overall depth 76cm
Seat area 46*25 cm
Adjustable handle height 81-94 cm
Max. user weight 136 kg
Net weight 8.15 kg
Assembly instructions
2. Take out the main frame and press
the both sides of the seat,then the
seat was secured at a click.
08
1. Remove the rollator from the
packing and remove the protective
foils.Spread out the parts for
assembly as shown.
3. Remove the rear wheel with
marking "RB",and insert the rear
wheel with marking "RB" into the
frame with marking "RB".
4. Remove the rear wheel with
marking "LB",and insert the rear
wheel with marking "LB" into the
frame with marking"LB".
5. Remove the wing screw on the front
wheel .
6. Insert the front wheel into the frame.
7. Fasten the front wheel with the
previously loosened wing screw.
The Black wing screw pointing
outwards. When turning, the screw
head will tighten in the frame.And
then, Repeat steps 5. - 7. for the
second front wheel on the other side
of the frame.
09