Costway JH10021 Instrucciones De Montaje página 7

2. Attach the cane holder to the side of
the frame in the provided position.To
do this, slide the cane holder onto
the holder from above.
Folding and storing the rollator
2. Continue to push the rollator on
both sides of the frame.
• MAINTENANCE
Over a period of time, the brake cables may stretch, and if no
further adjustments can be made, the cables should be
replaced. Seek the help of the manufacture when replacing
brake cables. The castors should be checked that they are
secure each time before using the rollator. Also, check the
brakes operate correctly and the handles and hand knobs are
secure. Should any part of the rollator appearloose or
insecure, discontinue use until it is inspected by a qualified
technician. The following shows the maintenance schedule:
12
1. Pull the handle in the middle of the
seat firmly upwards to fold the
rollator.
Weekly
• Check brake for malfunction
• Check all wheels and castors for loose bolts and nuts and
knobs
Periodically
• Check hand grips for wear
• Check frame bolts are secure
• Check front and rear axle bolts are secure
• Check tires for wear or cracks
Yearly
• Once a year have your rollator fully inspected, cleaned,
maintained and lubricated with all moving parts
Serviceable Components
• Wheels
• Hand grips
• Bag
• Knobs
• Cane holder
• Standing armrest sleeve
CLEANING
Your rollator can be cleaned with a damp cloth or sponge and
warm soapy water. Domestic anti-bacterial surface cleaners
may be used if required. Care should be taken not to leave
any cleaning residues on the hand grips or seat(where
fitted)which may leave them slippery when used. Do not use a
scouring pad for scrapers this may damage surface coatings.
13