Publicidad
Idiomas disponibles
Idiomas disponibles
IMPORTANT
SAFETY
INSTRUCTIONS
7
IMPORTANT
SAFETY
INSTRUCTIONS
READ
ALL
INSTRUCTIONS
BEFORE
USE
_WARNING
For your safety, the information
in this manual must be followed
to minimize
the risk of fire or explosion, electric
shock, or to prevent property
damage, injury to persons, or death.
SAFETY iNSTRUCTiONS FOR CONNECTING ELECTRiCiTY
_WARNING
To reduce the risk of fire, electric shock, or injury to persons when using this appliance,
follow basic precautions,
including
the following:
• Do not,
under
any circumstances,
cut or remove
the
ground
prong
from
the
power
cord,
To prevent
injury
to persons
or damage
to the dryer,
the electrical
power
cord
must
be plugged
into a properly
grounded
outlet.
• For personal safety, this dryer must be properly
grounded.
Failure to do so can result in electric shock
or injury.
• Refer to the installation
instructions
in this manual
for specific electrical
requirements
for your model.
Failure to follow
these instructions
can create an
electric shock hazard and/or a fire hazard.
• This dryer
must be plugged
into a properly
grounded
outlet. Electric shock can result if the
dryer is not properly grounded.
Have the wall
outlet and circuit checked by a qualified
electrician
to make sure the outlet is properly
grounded.
Failure to follow
these instructions
can create an
electric shock hazard and/or a fire hazard.
. The dryer should always be plugged into its own
individual
electrical outlet which has a voltage
rating that matches
the rating plate. This provides
best performance
and also prevents overloading
house wiring
circuits which could cause a fire hazard
from overheated
wires.
. Never unplug
your dryer by pulling on the power
cord. Always grip plug firmly and pull straight out
from the outlet. The power cord can be damaged,
resulting
in a risk of fire and electric shock.
. Repair or replace
immediately
all power cords that
have become frayed
or otherwise
damaged.
Do not
use a cord that shows cracks or abrasion
damage
along its length or at either end. The power cord can
melt, creating an electric shock and/or fire hazard.
. When installing
or moving
the dryer, be careful not
to pinch, crush, or damage the power cord. This will
prevent injury and prevent damage to the dryer from
fire and electric shock.
SAVE THESE INSTRUCTIONS
Publicidad
