Smarttech 215N01FVF Manual De Usuario página 6

Cable connection
he configuration information on the back of the monitor varies by product model.
Read the following before connecting the product.
1. Before connecting the product, be sure to check the two ports of the supplied signal cable, as well
as the shape and position of the ports on the product and external devices.
2. Before connecting the product, be sure to remove the power cord or power adapter from the
product and external devices to prevent damage to the product due to short circuits or overcurrent.
3. After all signal cables are properly connected, connect the power cord or power adapter back to the
product and external devices.
4. After completing the connection, be sure to read the manual to familiarize yourself with the product
features, precautions, and other information needed to use the product properly.
HDMI: Using an HDMI cable to
connect the product's HDMI port to
HDMI
the PC's HDMI OUT port.
PC analog signal input
VGA
Panel control
Menu/Select
Exit/Input Menu
Up/Volume+
Down/Brightness
Standby Power Off/On
EARPHONE OUT: Use a headset plug to
connect to the EARPHONE OUT jack.
EARPHONE
DC IN 12V: Use the adapter to access
the port, the power supply of this
interface only supports DC 12V,
DC IN
use the matching adapter to access,
please consult the authorized service
center for the non-original adapter.
4