Proline DVE 6 P Manual De Instrucciones página 28

GB
BEFORE INSTALLING THE APPLIANCE
Before connecting your dryer to the power supply, check that the voltage
stated on the rating label of your appliance corresponds to the voltage in
your home. A different voltage could damage the appliance.
The plug is the only way to unplug the appliance and should therefore be
accessible at all times. To turn off main power to the appliance, turn it off
and then detach the plug from the outlet.
The appliance must be grounded. The manufacturer is not responsible for
damages that may occur as a result of usage without grounding.
INSTALLATION
The dryer should not be located near a gas hob, cooker, heater or grill,
as flames from the burners could damage the dryer.
When installing the appliance, make sure that the power cord is not trapped
or twisted.
The appliance is best operated between -5°C and 45°C. Outside this
temperature range, performances may be affected.
For better drying performance, keep the rear
of the appliance away from the wall.
Leveling the appliance
The dryer must be perfectly level to ensure safe and proper operation.
If the dryer is not properly level, adjust the levelling feet as necessary.
Installing the vent tube
Securely fasten the vent tube to the outlet at the
rear of the dryer.
28