Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATION
This product is only suitable for professional use. MOVILED 1915 AZ is designed only for indoor use. This
device should be kept dry to avoid moisture, overheating or dusty environment. Ensure that the unit does
not take into contact with water or any other liquid.
MOVILED 1915 AZ can be placed on a stable surface or stand but the common operating mode is rigging
it in a truss system. Please, check and follow the next recommendations for the safe use of this device:
-
The truss system must be built in a way that it can hold 10 times the weight of all rigging elements
for 1 hour without any harmful deformation.
-
The fixation system (clamps or hangs) must be able to hold 10 times the weight of the device.
-
The device must always be secured with a safety attachment, e.g. steel cable.
-
The operator must check that the installation meets the safety standards and the device installation
is approved by a skilled person.
DMX Connection.
The DMX cable must use the professional shielded twisted pair cable. Standard loudspeaker cable is not
reliable to control long-range data. 24AWG cable is suitable for up to 300 meters of long-distance signal
transmission; for longer distances, a DMX 512 signal amplifier should be used.
Don't overload the connection. One continuous connection can support up to 30 devices. It is advisable
to use a DMX splitter to distribute the signal without losing its integrity.
Connect the DMX512 input terminal to the controller. After that, connect the output terminal to the next
device. Repeat this step with all fixtures in the chain. To prevent system errors, the last device in a DMX
chain needs to be equipped with a terminating resistor (120 ohm, 1/4 Watt).
Pin occupation
Pin 1: Ground
Pin 2: Pin -
Pin 3: Pin +
3
Publicidad
