Publicidad
Idiomas disponibles
Idiomas disponibles
• Do not install the product indoors in an environment where water or other
liquids may be drenched;
• The product should be stored in a dry environment without corrosive gas,
avoiding direct sunlight;
• Please do not use the product in extremely hot, cold, dusty, corrosive or high
humidity environment. Please refer to the parameter list of the product for
specific temperature and humidity requirements.
• Avoid pointing the lens directly at strong light (such as the sun or laser beam,
etc.), otherwise the image sensor will be damaged;
• Keep the ventilation around the product smooth and avoid heat accumulation;
• Products accessing the Internet may face network security problems, so please
strengthen the protection of personal information and data security;
• Please contact us in time if you suspect that the product may have network
security risks;
• Please take good care of your username and password;
• Please keep all the original packaging materials of the product properly. When
there is any problem, please use the packaging materials to pack the product and
send it to the agent or return it to the manufacturer for treatment. Accidental
damage in transport caused by non-original packaging materials shall be borne
by the user;
• Please do not turn the camera by hand after power-on;
• Please plug and unplug the Micro SD card only after disconnecting the power
supply.
11
Publicidad
