Control & Function - Quarkpro light NEBULA Manual Del Usuario

ENGLISH
4
Power Switch
5 Fuse Holder
6
Main Power Input With IEC socket and integrated fuse holder.
DMX
7
Input/Output
8
Control panel
9
Microphone
CONTROL & FUNCTION

Regular breaks during operation are essential to maximize the life of this
device as it is not designed for continual use.

Do not switch the unit on and off in short time intervals

Always unplug the unit when it is not used for a longer time. Or before
replacing the bulb or start servicing.

In the event of serious operation problems, stop using the fixture and
contact your dealer immediately.
ATTENTION
Operation
AUTO SHOW Stand Alone Mode

Press FUNC to enter MODE OPTION.
NEBULA
Switch ON and OFF the fixture
The replaced fuse is hold here
3 pins male/female XLR connector
To control the fixture with digital LED display, check
more information on CONTROL & FUNCTION
To detect the music/sound signal
: Laser will be output from laser aperture in 5 seconds
after the unit is powered on.
11
USER MANUAL
QUARKPRO LIGHT