Quarkpro light NEBULA Manual Del Usuario página 15

ENGLISH
DMX MODE
Press FUNC to enter MODE OPTION

Till to LED panel shows 001.

Press ENTER to confirm the setting.

The laser is working in "DMX MODE". With help of UP/DOWN button, it could be
easily change the DMX address of the laser.
MASTER/SLAVE MODE
Press FUNC to enter MODE OPTION

Till to LED panel shows SLA

Press ENTER to confirm the setting.

The laser is working in "SLAVE MODE". Connect MASTER laser and SLAVE
lasers with DMX cable, the SLAVE lasers do what exactly MASTER laser does.
Check "5.2 DMX connection" to have more details about laser connection.
NEBULA 13
USER MANUAL
QUARKPRO LIGHT