Esoteric PS-01F Manual Del Usuario página 9

A
DC power output connector (DC OUT)
Use the DC power cord to connect the DC IN connector of the
F-01 or F-02 with the DC OUT connector of this unit.
o Use the DC power cord included with this unit for connection.
o Always disconnect the power plugs of both the PS-01F and
the F-01/F-02 before connecting or disconnecting the DC
power cord.
o The DC power cord has labels attached to its connectors.
As shown in the illustration on page 8, connect the connector
with arrows to the F-01/F-02 and connect the connector with the
product name (PS-01F) to this product.
Check the orientation of the indentations, protrusions and
arrows of the DC power cord and hold it by its plug. Align the
marks on the plug to the connector and insert it. Turn the ring
clockwise to lock it. Reverse these procedures to disconnect it.
When connecting or disconnecting the cord, do not angle or
wiggle the plug.
o Be careful not to pinch your fingers in the ring when connecting
or disconnecting the DC power cord.
Connector
Align the indentations and
protrusions when connecting.
Turn the ring clockwise to lock it.
Plug
B
AC inlet (~IN)
Connect the AC power cord to this AC inlet. After completing all
connections, plug the power plug for this unit into a power outlet.
V Use only a genuine ESOTERIC power cord. Use of
other power cords could result in fire or electric
shock.
V Disconnect the power plug from the outlet if you
will not use the unit for a long time.
9