Dual DL-P06-003 Manual Del Usuario página 17

Bluetooth : Pair Device with external BT speaker
 Power on external speaker and be sure it's on pairing mode
 Power on turntable: "BT" is blinking on screen
 Press TWICE quickly Bu�on M : Then display show "SEND" blinking
 Device and BT speaker will pair automa�cally
 Press again M bu�on to set PHO mode
 There four audio sources can be transmi�ed, USB/TF/AUX IN/PHONO.
Connecting to an external sound system
Connect an RCA audio cable (not supplied) to the AUDIO LINE OUT sockets on the rear of the turntable.
Connect the other end of the cable to an AUDIO INPUT on the amplifier.
 Red plug into R channel output.
 White plug into L channel output.
USB/TF function
(lift up the tone arm and put it on the rest)
 Insert your USB disk or TF card.
 Wait for few second, it displays USB or TF music will begin.
 Under this function, other functions will stop automatically.
USB/TF recording
 Insert the USB disk or TF card, press and hold the "M" button till display "REC"
and click the "Play/Pause" button to confirm, recording will then commence.
 To stop recording hold the "M" button till display "STOP" and click the "Play/Pause"
button to confirm, recording will then stop.
Bluetooth func�on : pair external device with turntable speakers
(lift up the tone arm and put it on the rest)
 Press "M" key to select Bluetooth mode.
 Make sure the available Bluetooth device into "pairing mode"
 Choose the click the right Bluetooth name to connect.
Clear recorder music
 When you want to clear the recorder music, press and hold the "PLAY/PAUSE" button till display
"DEL" and click the "PLAY/PAUSE" button once again to confirm, the currently playing music will
be removed.
Aux in function
(Lift up the tone arm and put it on the rest)
 Insert Aux in cable (Please note other functions will not work while cable is inserted)
17