Descargar Imprimir esta página

MADISON FREESOUND-VINTAGE-WD Manual De Uso página 2

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 10
BLUETOOTH VINTAGE SPEAKER
Contents of the carton
1x Bluetooth speaker FREESOUND-VINTAGE
1x USB-C charger lead to charge the built-in battery
1x 3.5mm AUX lead
1x manual
Warnings:
The apparatus shall not be exposed to dripping or splashing and that no objects filled
with liquids, such as vases, shall be placed on the apparatus.
For indoor use only
Do not place on the apparatus as naked flame source, such as lighted candles.
Do not use the unit in a tropical climate. Only for use in temperate climates.
IMPORTANT NOTE : Appliances containing Lithium-ion batteries
1.
PRIOR to using the unit for the first time, please charge fully the battery
2.
Charge the battery regularly after each use. Don't wait until it is discharged!
3.
DON'T allow the battery to discharge completely, otherwise it will lose 20% of its
capacity or even be totally damaged! If the voltage becomes too low, the internal circuits
are not powered anymore and it will become impossible to recharge the battery!
4.
If you don't use the unit for a longer period of time, it is recommended to charge it at 40%
of its capacity and check/charge it once per month.
The life time of the battery depends on the observance of these recommendations.
** BATTERIES ARE NOT COVERED BY THE WARRANTY **
We cannot be held responsible for damaged batteries further to the non-observance of
Charging the Bluetooth Speaker
Plug the supplied USB-C lead into the USB-C port on the rear panel of the unit and the
other end into a USB socket delivering a voltage of 5V�� 2A.
Location of controls
1. ON/OFF switch
2. : Previous song
3. : Play/pause music
4. : Next song
5. USB input port
6. AUX IN jack
7. Bass control
8. Treble control
9. Volume control
2
ENGLISH
these basic rules.
1
2
© Copyright LOTRONIC 2024
3
4
5
6
8
9

Publicidad

loading

Este manual también es adecuado para:

10-7086