Descargar Imprimir esta página

MADISON FREESOUND-VINTAGE-WD Manual De Uso página 3

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 10
FREESOUND-VINTAGE-WD
Pairing the speaker with a Bluetooth enabled device
Keep the speaker and the Bluetooth device within 1m of each other during the pairing
process. Push the ON/OFF switch to ON position. A tone is heard and the Bluetooth LED
indicator will flash blue. Set your mobile phone or other Bluetooth enabled device to
search for Bluetooth devices. When the Bluetooth device finds the speaker, select MAD-
ISON in the list of found devices. After a successful pairing, a tone will be heard and the
Bluetooth LED indicator will slowly flash blue.
If a previously paired device is in the range when the speaker is turned on, the speaker
will connect to it automatically.
Using as a Wired Speaker
To use the speaker as a wired device, plug one end of the 3.5 auxiliary cable into the
AUX jack on the top panel of the speaker and the other end into your device or comput-
er's headphone jack. Use the controls on the connected device for media playback and
either the connected device's controls or the volume, bass and treble knobs on the top
panel of the speaker.
Using USB function
Plug your USB device into USB port (5) on the top panel of the unit. The speaker enters
automatically into USB mode.
Specifications
Output power ......................................................................................................2 x 10W
S/N ratio ................................................................................................................>65dB
Frequency range ........................................................................................ 80Hz – 18kHz
Transmission frequency ............................................................................. 2.40-2.48GHz
Max. RF power ................................................................................................. -3.08dBm
Input voltage .................................................................................... 5V�� 2.0A via USB-C
Built-in battery .......................................................................................7,4V�� 1500mAh
Output power ..............................................................................................................9W
Dimensions ......................................................................................325 x 140 x 180mm
Weight .....................................................................................................................2.1kg
In accordance with the requirements of UK standards
The product is for indoor use only
This marking indicates that this product should not be disposed with other household wastes throughout
the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal,
recycle it responsibly to promote the sustainable reuse of material resources. To return your used device,
please use the return and collection systems or contact the retailer where the product was purchased.
They can take this product for environmental safe recycling.
Code: 10-7086
3

Publicidad

loading

Este manual también es adecuado para:

10-7086