Rev-A-Shelf 4ADI-36-1 Instrucciones De Instalación página 2

STEP 1
Measure inside drawer dimension
(See Figure 1).
STEP 2
Transfer measurements to insert.
If insert is too large for the drawer,
carefully trim it to fit. Drop insert
into drawer (See Figure 2).
Note: Table Saw recommended.
STEP 3
Position the Deep Dividers in your
desired configuration
(See Figure 3).
2
Fig. 1
Fig. 2
Fig. 3
Customer Service: 800-626-1126 | rev-a-shelf.com