Publicidad
Idiomas disponibles
Idiomas disponibles
CHARGING STAND INSTRUCTIONS
The FXONE Universal Battery Charging Stand can be powered by either a universal
FXCORD (not included) or the included USB-C cable.
To use the USB-C cable: Connect the USB-C cable to the USB-C port at the back
of the FXONE Universal Battery Charging Stand, then insert the battery into the
charger.
To use the universal FXCORD: Connect the standard charging cord (FXCORD) to
the standard port at the back of the FXONE Universal Battery Charging Stand, then
insert the battery into the charger.
To insert the battery into the charging stand: Align the arrow mark on the battery
with the arrow mark on the charger, then insert the battery into the opening and
push into the housing until the locking mechanism engages.
USB-C Port
FX899 IB-18195B.indd 15-16
FX899 IB-18195B.indd 15-16
Standard Port
BATTERY/CHARGING INDICATOR (TOP OF FXONE BATTERY)
Blue flashing – Charging
Blue solid – Charged (see charge levels below)
• The charging stand may become warm while charging. This is normal.
• Preserving the battery: In order to maintain the optimum capacity of the
rechargeable battery, it should be recharged for 3 hours approximately every 6
months.
• Only use with AC adapter CA78M/C045120-A (not included) or USB adapter
CA88M (included).
WARNING:
If the charging light suddenly starts to flash rapidly, the battery is
faulty. If this happens, stop charging, unplug the FXONE Universal Battery Charging
Stand from the outlet/USB power source and contact our Customer Care Center for
BATTERY CHARGE-LEVEL INDICATOR
The FXONE Universal Battery has a built-in 4-stage LED ring
light to indicate charge level of the battery. To check charge
level, press on the central button on the bottom of the battery
housing to display current charge level.
Full circle – 100% charge
¾ circle – 75% charge
½ circle – 50% charge
¼ circle – 25% charge
Battery-Level
Indicator Button
2023/11/3 11:19
2023/11/3 11:19
Publicidad
