07
INSTALLATION
COUNTERTOP INSTALLATION
Remove all packing material and accessories. Examine the oven
for any damage such as dents or broken door. Do not install if
oven is damaged.
Cabinet:
Remove any protective film found on the microwave oven cabinet
surface. Do not remove Waveguide cover that is attached to the
oven cavity to protect the magnetron.
1. Select a level surface that provide enough open space
for the intake and/or outlet vents.
0 cm
20 cm
MIN 85
cm
1 ) The minimum installation height is 85cm.
2) The rear surface of appliance shall be placed against a wall. Leave
a minimum clearance of 30cm above the oven. A minimum
clearance of 20cm is required between the oven and any adjacent
walls.
3) Do not remove the legs from the bottom of the oven.
30 cm
20 cm
12