Medion MD 18493 Guía Rápida página 85

 Unplug the appliance from the socket:
– when you are cleaning the appliance
– when you are assembling or disassembling the appliance
– if the appliance is damp or wet
– if you are no longer using the appliance
– when the appliance is unattended
– during thunderstorms.
 Do not expose the appliance to extreme conditions. Avoid:
– high humidity or wet conditions
– extremely high or low temperatures
– direct sunlight
– open flames.
WARNING!
Risk of fire!
There is a risk of fire due to high temperatures!
 Ensure that the appliance does not come into contact with
any other objects during operation. Allow sufficient clearance
in all directions and above. Above all, do not set up the
appliance near easily flammable materials (curtains, drapes,
paper etc.).
 The induction hob must be installed on a heat-resistant,
level and stable surface. Only install the induction hob in a
protected dry room.
 Do not install the induction hob on a metal surface made of
iron, stainless steel or aluminium.
 To ensure adequate ventilation, a minimum safe clearance
distance of 10 cm to the top, back and on both sides must
be observed. Do not cover or block the openings on the
appliance.
 Never place the appliance on the edge of a table – it could tip
over and fall.
88