Uline H-10987 Manual Del Usuario

H-10987
FORKLIFT CARPET POLE –
CARRIAGE MOUNT
These instructions use signal words to direct the user's
attention to important safety-related messages. These
messages describe uses of the product that could
result in personal injury or property damage. Each
signal word corresponds to a specific hazard level.
WARNING! Improper or careless use could
result in serious personal injuries or death.
• Before using this product, contact the
manufacturers of all forklifts that will use it to
request: 1) written approval; and 2) markings for
each forklift that identify the coil carrier and give
the approximate weight of the forklift and carrier
at maximum elevation with a laterally centered
load. Do not use the carpet pole until forklifts are
marked.
• Read and understand these instructions before
installing, using or servicing the product. Read the
instructions to refresh your understanding of proper
use, inspection and maintenance procedures
whenever necessary.
• Do not exceed the capacity or maximum rated
load of unit. See label on the right side of the
carriage back plate.
PAGE 1 OF 12
1-800-295-5510
uline.com
SAFETY
• Inspect the carpet pole before each use.
• Before attaching the carpet pole to the carriage
of the forklift, inspect the carriage and confirm
that all parts are structurally sound and in nominal
condition.
• Always test the soundness of the connection
between the carriage back plate of the carpet
pole and the carriage of the fork truck before
loading the carpet pole. Lift the roll a few inches
above the ground. Load swing should be minimal,
and the carpet pole should not shift. If the load is
unstable, return it to the ground and use another
piece of equipment to transport the carpet.
• Inspect the carpet pole before each use as
described in the Maintenance section on page 3.
Para Español, vea páginas 5-8.
Pour le français, consulter les pages 9-12.
0324 IH-10987