Safety Instructions - Danby DWM99W Manual De Instrucciones

SAVE THESE INSTRUCTIONS
1. Please read this instruction manual carefully
before operating.
2. Refer to the Grounding Instructions
(under electrical requirements) in this
manual for the proper grounding of
the washer.
3. Do not wash articles that have been previously
cleaned in, washed in, soaked in or spotted
with gasoline, dry-cleaning solvents, other
flammable or explosive substances as they
give off vapors that could ignite or explode.
4. Do not allow children to play on or in the
washer. Close supervision of children is
necessary when the washer is used near
children.
5. Do not reach into the washer if the inner tub
or agitator is revolving.
6. Do not install or store the washer where it will
be exposed to water and/or weather.
7. Do not tamper with the controls.
8. Do not repair or replace any part of the washer,
or attempt any servicing unless specifically
recommended in the user maintenance
instructions trouble shooting guide that you
understand and have the skills to carry out.
9. Do not add gasoline, dry-cleaning solvents, or
other flammable or explosive substances to the
wash water. These substances give off vapors
that could ignite or explode.
10. Under certain conditions, hydrogen gas may be
produced in a hot water system that has not
been used for two weeks or more.
HYDROGEN GAS IS EXPLOSIVE. If the hot
water system has not been used for such a
period, before using this washer, turn on all hot
water faucets and let the water flow from each
for several minutes. This will release any
accumulated hydrogen gas. THIS GAS IS
FLAMMABLE, DO NOT SMOKE OR USE AN
OPEN FLAME DURING THIS TIME.
11. Replace worn power cords and/or loose plugs.

SAFETY INSTRUCTIONS

12. To reduce the risk of an electric shock or fire,
13. Use your washer only for its intended purpose,
14. ALWAYS disconnect the washer from electrical
15. Install the washer according to the
16. To reduce the risk of fire, clothes which have
17. Do not use fabric softeners or products to
18. Keep your washer in good condition. Bumping
19. Be sure water connections have a shut-off
20. The LID MUST BE CLOSED any time the
2
DO NOT use an extension cord or an adapter
to connect the washer to the electrical power
source.
washing clothes.
supply before attempting any service.
Disconnect the power cord by grasping the
plug, not the cord.
INSTALLATION INSTRUCTIONS. All
connections for water, drain, electrical power
and grounding must comply with local codes
and be made by licensed personnel when
required. Do not do it yourself unless you know
how!
traces of any flammable substances such as
vegetable oil, cooking oil, machine oil,
flammable chemicals, thinner etc. or anything
containing wax or chemicals such as in mops
and cleaning cloths, must not be put into the
washer. These flammable substance may
cause the fabric to catch on fire.
eliminate static unless recommended by the
manufacturer of the fabric softener or product.
or dropping the washer can damage safety
features. If this occurs, have your washer
checked by a qualified serviceman.
valve and fill hose connections are tight.
CLOSE the shut-off valves at the end of each
wash day.
washer is to spin. DO NOT by-pass the safety
switch by permitting the washer to spin with the
lid open. A brake will stop the inner tub within
seconds if the lid is opened during spinning. If
the inner tub does not stop when the lid is
opened, remove the washer from use and call
a serviceman.