Descargar Imprimir esta página

Audibax MANHATTAN 10A Manual De Usuario página 4

Altavoz activo profesional

Publicidad

Idiomas disponibles

Idiomas disponibles

MANHATTAN 10A / MANHATTAN 12A / MANHATTAN 15A
FOR DEVICES DESIGNED TO BE CONNECTED TO THE MAIN POWER SUPPLY:
- ATTENTION: If your equipment has a power cord with a grounding plug, it must be
connected to a wall outlet with a ground connection. Never remove the grounding plug
from the power cord.
- If your equipment has been exposed to extreme temperature changes, allow it to reach
room temperature before turning it on. Otherwise, moisture and condensation may
damage the equipment.
- Before plugging in the equipment, make sure that the voltage and frequency of the
power outlet match the specifications of the equipment. If the equipment has a voltage
selector, only connect it to the power outlet if the values match. If the power cord or
adapter does not fit your outlet, contact an electrician.
- Do not step on the power cord. Make sure it is not pinched at the outlet, adapter, or
equipment connection.
- Keep the power cord or adapter within reach and disconnect the equipment from the
power supply when not in use or when cleaning it. Always unplug the cord or adapter by
pulling the plug or adapter, not the cord. Never touch the cord or adapter with wet hands.
- Avoid frequently turning the equipment on and off, as this can reduce its useful life.
- IMPORTANT: Only replace fuses with those of the same type and rating. If a fuse
repeatedly blows, contact an authorized service center.
- To completely disconnect the equipment from the power mains, unplug the power cord
or adapter from the outlet.
- If your device has a Volex power connector, the mating Volex connector must be
unlocked before it can be removed. Be careful when laying cables, as the equipment can
slide or fall if the power cord is pulled.
- Unplug the power cord or adapter before an extended period of disuse or in case of
lightning strike risk.
- Only install the equipment when it is disconnected from the power source.
- To prevent damage and overheating, qualified personnel should regularly clean and
service the equipment depending on ambient conditions like dust, nicotine, and fog.
If the product contains the following symbols, please, read carefully:
CAUTION
CAUTION: To reduce the risk of electric shock, do not remove cover (or
Risk of Electric
back). There are no user serviceable parts inside. Maintenance and repairs
Shock.
Disconnect all
power sources
should be exclusively carried out by qualified service personnel.
before servicing
The warning triangle with lightning symbol indicates dangerous
uninsulated voltage inside the unit, which may cause an electrical shock.
The warning triangle with exclamation mark indicates important operating
and maintenance instructions.
IMPORTANT INFORMATION
CAUTION! HIGH VOLUMES IN AUDIO PRODUCTS!
This equipment is designed for professional purposes and its commercial use must
comply with the applicable national rules and regulations for accident prevention.
As the manufacturer of this product, Audibax has the responsibility to inform you about
the potential health risks associated with its use. One such risk is hearing damage caused
by prolonged exposure to high volume.
When this product is in use, it can generate high sound-pressure levels that may cause
irreversible hearing damage to performers, employees, and audience members.
To prevent this, it is important to avoid exposing yourself or others to volumes exceeding
90 dB for an extended period of time.
www.audibax.com
2
PRO

Publicidad

loading

Este manual también es adecuado para:

Manhattan 12aManhattan 15a