WolfPack DT2140 Manual De Instrucciones página 27

6. ASSEMBLY
Assemble the protective cover and edge guide (see Figure)
• Rotate the fixed trestle, using 2pcs ST4 x 14 screw to install the edge guide
• Hold the machine shelf, fitting the protective cover on the machine shelf.
• Align the protective cover and the machine shelf together with 4pcs ST4 x 14 screw.
Assemble auxiliary handle (see Figure)
Assemble the auxiliary handle to the mount provided, then secure the auxiliary handle with
the help of the screw and the adjustment lock provided.
Adjusting auxiliary handle
angle (see Figure
Undo the adjustment lock
knob for the auxiliary handle
until it can be
forwards or backwards
without any
resistance. Set the required
position and tighten the lock
knob again.
Conectar el enchufe y el cable alargador.
Adjusting motor head
motor angle (see Figure)
Press the button for the
angle
moved choose a fit position. Five
different locking angles are
great possible.
of adjustment to
27
Height adjustment
(see Figure)
Undo the union nut until the
grass trimmer handle can
be moved in and out freely.
Now set the
working height and secure
the handle in this position
by tightening the union nut
again.
required