NORAUTO 96638 Manual página 45

General Comments:
Congratulations on the purchase of your new product! This product was carefully designed
and manufactured to give you many years of dependable service. Only minor maintenance
(such as cleaning and lubricating) is required to keep it in top working condition. Be sure to
observe all maintenance procedures and safety precautions in this manual and on any safety
decals located on the product and on any equipment that you use in conjunction with this
product.
This manual is designed to help you do a better, safer job. Read this manual carefully and
become familiar with its contents. saVe tHIs manUal For FUtUre reFerenCe!
INSTRUCTIONS
When unpacking the tool:
● Carefully remove the tool and accessories from the box.
● Make sure that all items listed in the packing list are included.
● Inspect the tool carefully to make sure no breakage or damage occurred during
shipping.
● Do not discard the packing material until you have carefully inspected and successfully
operated the tool.
WarnInGs
Safety, performance, and dependability have been given top priority in the design of this
product making it easy to maintain and operate.
WarnInG:
Do not attempt to use this product until you thoroughly read and completely understand the
operator's manual. Pay close attention to the safety rules, including Dangers, Warnings, and
Cautions. If you use your product properly and only as intended, you will enjoy years of safe,
reliable service.
WarnInG:
The operation of any tool can result in foreign objects being thrown into your eyes, which can
result in severe eye damage. Before beginning operation, always wear safety goggles and
heavy-duty work gloves.
WarnInG:
When using the tool basic safety precautions should always be followed to reduce the risk of
personal injury and damage to equipment!
WarnInG:
The warnings, cautions, and instructions discussed in this instruction manual cannot cover all
possible conditions and situations that may occur. It must be understood by the operator that
common sense and caution are factors which cannot be built into this product, but must be
supplied by the operator.
WarnInG:
NEVER operate this machine if the arbor plates are uneven — this can cause them to break.
Any obstruction under the arbor plates can cause this to happen.
WarnInG:
ALWAYS align your items vertically prior to pressing them together, otherwise one or both of
the items may eject itself sideways from your press at a high velocity and force.
44