Celexon Seoul Manual De Instrucciones página 10

• Make sure that the product is not loaded asymmetrically, especially after the product
has been adjusted.
• All supply lines and cables must not be subjected to any additional load and must
be laid in such a way that they are not damaged or crushed.
• Failure to comply with the above instructions may result in personal injury and
damage to the product or equipment connected to it. Incorrect installation or use
may also invalidate the warranty.
• If you are unsure about the use of the product, please contact your specialist
personnel, your dealer or celexon directly (Web: www.celexon.co.uk, Mail:
info@celexon.co.uk).
• Technical changes and errors excepted.
The manufacturer accepts no responsibility for damage to property or personal injury,
if the bracket is used outside the recommended specifications, or in the event of
improper installation.
DISCLAIMER
The information in this document is subject to change without notice by the
manufacturer.
Changes will be added to subsequent versions of this manual. The manufacturer
does not guarantee or warranty for the correctness of the information in this
document.
2