Celexon Seoul Manual De Instrucciones página 13

STEP 3 I MOUNTING DISPLAY
Screw 2 M8x40 (Samsung Flip 55" and 65") screws into the upper VESA
threaded holes of the Flip. Screw in the screws only so far, that a gap of approx.
5 mm remains between the screw head and the display.
Now hang the display on the stand using the screws. For this it is important
that you did not fully tighten the screws in the previous step. Carry out this
step with two people.
Now screw the other two M8x40 screws into
the lower VESA threaded holes and tighten all
4 screws.
The assembly is now complete.
Fig. 3
Fig. 4
Fig. 5
5