Manual Mode" Dispensing Mode Activation; Resetting Dose Counters; Function Block; Enter Service Menu - Crem Pulse Manual De Usuario

Note:
i
It's possible to stop the automatic dispensing before it's finished the grinding time. During dispensing, press
with the filter holder the grinding start key to manually stop dispensing:
Press the grinding start key to resume delivery for the remaining time.
Press the dose button (blinking) to stop dispensing. The grinding time returns to the set value.

"Manual Mode" dispensing mode activation

Resetting dose counters

From the dispensing programmed doses screen, long press the
delivered.

Function block

By pressing both keys
setting in locked. On the display appear the lock icon.

Enter service menu

INFO
Model: PULSE
Firmware: X.XX
0
3
100% Time: 0
16
and the time dispensing
PROGRAMMING
By pressing the manual mode is activated. To start
dispensing:
Press to start dispensing and press it again to stop
dispensing.
Insert the filter holder until press the grinding start
key; remove the filter holder to release the grinding
start key and stop dispensing.
By pressing the keys
the relative dispensing mode.
button to reset partial counters of doses
Press again both keys
appliance functions.
Press the key and switch on the appliance, to
access the following screen:
Appliance model.
Firmware version.
1 and 2 dose total counter (cannot be reset).
Counter total of manual grind time.
Display brightness, adjustable with the keys
and .
Press the key or
dose screen.
or the appliance returns to
and to unlock the
to return to the dispensing