Publicidad
Idiomas disponibles
Idiomas disponibles
Electrical Specifications
Output
17-21 V- 4.6 A, max. 96 W to power LS0 luminaire
3.3 V- control signal to control light level
and color temperature of LS0 luminaire
Pre-Installation
Important Notes:
•
For installation by a qualified electrician in accordance with all local and national electric codes.
•
Turn power off before installing.
•
Damage to this product caused by wiring with power on voids the warranty.
•
Use copper conductors only.
•
For indoor use only.
•
For use only with LS0 luminaires.
•
DO NOT install if the product has any visible damage.
•
If moisture or condensation is evident, allow the product to dry completely before installation.
•
Operate between 32 °F and 104 °F (0°C and 40°C) ambient.
•
0% to 90% humidity, non-condensing.
•
X96-X-J2 is the second generation X96 controller and is compatible with all LS0 Lightbar Slim
High Output and Long Run configurations. It is required for all Uniform Lens configurations.
4 | X96 INSTALLATION GUIDE
Input
120/277 V~ 60 Hz Max 110 W
Current 0.92 A/0.40 A
Please read before installing.
P/N 3662841 Rev A
© 2023 Lutron Electronics Co., Inc.
Publicidad
