SKF TKST 21 Instrucciones De Uso página 15

promshop.biz
5.5 Settings
In order to select what function or setting you have
enabled or not, please access the Settings of the
Stethoscope. Use the direct access buttons 1 and 2
in order to scroll to the desired setting, then press
the direct access button 3 in order to select it and
enter the sub-menu of that specific setting.
Fig. 17 – Settings
The different settings are:
Auto off
Display brightness
Factory reset
SKF sounds
Volume limit
АО БЕРГ АБ (495) 727-22-72 mail@promshop.biz
off - 5 min - 10 min
20 - 40 - 60 - 80 - 100%
on - off
on - off
on - off
W A R N I N G :
Factory reset needs confirmation with the correct
button! If you press the direct access button 3
accidentally, then it goes back to the setting list and
does not trigger a factory reset.
In order to really confirm a factory reset, you
need to press the direct access button 2 when this
pop-up screen is displayed. This is in order to avoid
unwanted factory reset, which would erase all
personal recordings and reset all settings.
Fig. 18 – Factory settings
Fig. 19 – Factory reset
13
EN