PNI PMR R17 Manual Del Usuario página 8

Transmitting and Receiving
Press the PTT side key and speak into the radio's
microphone to transmit. The LED turns red.
Release the PTT key to receive. The LED is green when
the radio receives a signal.
Do not speak too close to the microphone or too loudly
so as not to distort the transmitted signal.
Channels scanning function
Briefly press the Scan side key. The voice prompt will
confirm the scanning activation "Scanning on".
During the scan, the green LED will flash.
When the radio detects a signal, it will stop scanning
and stay on that channel until the signal disappears.
After 2 seconds from when the signal disappears, it will
resume scanning.
Note: You can change the scan mode and add or remove
channels from the scan list through the programming
software (optional).
Press the PTT key to stop scanning. The voice prompt
will confirm "Scanning off".
Note: The function of the side keys can be customized
through the programming software (optional).
English 8 User manual