Aqua Medic Yasha 60 Manual De Instrucciones página 11

Fig. 5: Filter inlet adjustment at the top and bottom
The upper filter inlet is used to adjust the water level in the aquarium. The lower inlet regulates the strength of
the surface suction. Experience has shown that it is closed further than the upper inlet. When setting up the
aquarium, you should bear in mind that the lower comb also needs to be cleaned and possibly readjusted from
time to time.
6. Skimmer EVO 100
Fig. 6: EVO 100
1. Skimmer body
2. Foam cup
3. Foam cup's lid
4. Venturi pump (12 V DC/ max. 5 w)
5. Removable base plate
6. Silencer
7. Bracket
8. Hose for silencer
9. O-ring
10. Down-Button
11. On/Off
12. Up-Button
13. Impeller with needle wheel
14. Power supply unit (not shown): Input: 100 - 240 VAC
50/60 Hz / Output: 12 V/500 mA
11