Publicidad
Idiomas disponibles
Idiomas disponibles
Step
Description
No.
6
Hang the charger on the stand
just sliding it bottom side on
the dedicated binaries and
check it is stable.
Each stand can be mounted
with two chargers.
7
Now the supply cable must be
connected.
Open the frontal cover.
Make
input cable is not powered.
Open the wire cover (circled in
the picture), insert the power
supply cables into the bottom
hole, and connect the cables
according to the signs as
specified on the wire cover
scheme.
It should be noted that there is
no device for fixing the input
cable, so you must leave
enough space for the cable to
avoid the cable from being
pulled by external forces, or
you can add a cable fixing
device which stabilize the input
cable.
February 2023
Picture
sure
the
17
Publicidad
