Publicidad
Cleaning Your Blender
1
EASY CLEAN
To Easy Clean, pour 2 cups (473 ml) warm water in jar and add 1 drop liquid dishwashing detergent. Run the blender on EASYCLEAN for
10 seconds. Discard soapy water. Rinse with clean water.
This function is not a substitute for regular cleaning as instructed in "Cleaning Your Blender." This function should never be used when
blending any mixture containing eggs, milk, or any other dairy products, meats, or seafood.
The Easy Clean function should only be used to rinse the blender between batches of processing the same food. When the processing
of a single type of food is finished, the blender should be disassembled and thoroughly cleaned as instructed in "Cleaning Your Blender."
10
2
w WARNING
Electrical Shock Hazard.
Disconnect power before cleaning. Do not immerse cord,
plug, base, or motor in water or other liquid.
3
Wipe blender base, control panel,
and cord with a damp cloth or
sponge. To remove stubborn
spots, use a mild, nonabrasive
cleanser.
DISHWASHER-SAFE
DO NOT use the "SANI" setting
when washing in the dishwasher.
"SANI" cycle temperatures could
damage your product. Parts may
also be washed with hot, soapy
water. Care should be taken
when handling the cutting blade
assembly as it is very sharp.
Rinse and dry thoroughly. Do
not soak.
Publicidad
