Before using the charger, carefully
read through and familiarise yourself
with all the enclosed safety informa-
tion and the Operating Instructions.
Keep all enclosed documentation for
future reference, and pass on your
charger only together with this docu-
mentation.
4. Special Safety Instructions
For your own protection and for the pro-
tection of your power tool, pay attention
to all parts of the text that are marked
with this symbol!
Danger - electrical voltage
A slightly acidic, flammable fluid may leak
from defective Li-ion battery packs!
If battery fluid leaks out and comes into
contact with your skin, rinse immediately
with plenty of water.
If battery fluid leaks out and comes into contact
with your eyes, wash them with clean water and
seek medical attention immediately!
Do not recharge a fully charged battery pack!
Only for use in indoor rooms.
Protect the charger from moisture.
Never allow children to use the device.
Children should be supervised to ensure that they
do not play with the tool.
Keep children away from the battery charger and
the working area!
Keep your battery charger out of reach of children!
Pull out the mains plug immediately if the battery
charger starts to smoke or flames emerge!
Do not insert objects into the ventilation slots on
the battery charger – there is a danger of electric
shocks and short circuits!
Do not use faulty battery packs.
In areas with high metal dust exposure do not
charge any battery packs with AIR COOLED
chargers.
5. Overview
See page 2. The illustrations are regarded as
exemplary for all devices.
B
B
Battery pack (not in scope of delivery)
C
C
Sliding seat
D
D
Operation display
E
E
Warning display
6. Initial Operation
Before commissioning, check that the
rated mains voltage and mains frequen-
cy stated on the type plate match your
power supply.
Devices like these that generate direct current can
influence simple earth leakage protection devices.
Use a type F or better, with a release current of
max. 30 mA.
Before commissioning the charger, en-
sure that the air slots are free. Minimum
distance to other objects is 5 cm!
6.1
Self-test
Plug in.
The warning display (4) and the operating indicator
(3) light up one after the other for approx. 1 second
and the installed fan runs for approx. 5 seconds.
7. Use
7.1
Charging battery pack
Push the battery pack completely to the stop on
the sliding seat (2).
The operating indicator (3) flashes.
Note: To have the charge level displayed on Li-ion
battery packs, first take the battery pack out of the
charger and then press the button on the battery
pack.
7.2
Conservation charge
Once the charging process has finished, the batte-
ry charger automatically switches to conservation
mode.
The battery pack can remain in the battery charger
and is therefore always ready for use.
The operating display (3) lights up continuously.
GB
7