Publicidad
Idiomas disponibles
Idiomas disponibles
The solution you choose is mostly personal preference.
DRY Heat - a quick and convenient way to apply heat therapy to an area of the body. This is
typically the fastest solution for most users who want to maintain a certain heat level.
MOIST Heat - provides penetrating heat therapy to sore muscles.
1.
Remove the moist heat insert
2.
Lightly dampen the foam insert with water. (NOTE: water should NOT be
dripping from insert).
WARNING: DO NOT THOROUGHLY SOAK FOAM INSERT. DO NOT USE
GELS, SOLVENTS OR LIQUIDS OTHER THAN WATER ON THE FOAM INSERT.
NEVER IMMERSE PVC PAD IN WATER. FAILURE TO COMPLY MAY RESULT IN
PERSONAL INJURY.
3. Carefully place foam insert back into the fabric cover ensuring it is fully inserted and lays
completely flat.
4. With dry hands, plug into an appropriate 120 volt AC electrical outlet, noting the plug is
polarized and will only fit one way.
5. Place the heating pad on the desired treatment area.
WARNING: THE PAD SHOULD ALWAYS BE PLACED ON TOP OF THE TREATMENT AREA.
DO NOT PLACE PAD UNDERNEATH TREATMENT AREA AS TEMPERATURES CAN RISE TO
UNINTENDED/UNCOMFORTABLE LEVELS.
NOTE: This heating pad will automatically turn OFF after 2 hours of use. Unplug heating pad
when not in use.
Heat
Level
1
2
3
4
DRY HEAT VERSUS MOIST HEAT
FOR MOIST HEAT OPTION
USING THE CONTROLLER
Timing to Reach
Heat Level
9 min
10 min
13 min
15 min
4
Publicidad
