Tannoy VXP Serie Guia De Inicio Rapido página 21

40
VXP Series
Technical Specifications
VXP 6 (-WH)
System
Frequency response 88 Hz - 35 kHz ±3 dB 80 Hz - 35 kHz ±3 dB
(Full range mode) 80 Hz - 45 kHz -10 dB 67 Hz - 45 kHz -10 dB
Frequency response 120 Hz - 35 kHz ±3 dB 120 Hz - 35 kHz ±3 dB
(Hi-pass mode) 100 Hz - 45 kHz -10 dB 100 Hz - 45 kHz -10 dB
Nominal dispersion 90° conical @ -6dB point 90° conical @ -6dB point
Directivity factor (Q) 5.6 6.8
Directivity index (DI) 7 7.9
Dynamic range 106 dB 106 dB
Maximum SPL 123 dB peak 125 dB peak
Crossover type Passive 1.6 kHz with Passive 1.7 kHz with
dynamic HF protection dynamic HF protection
Transducers 150 mm (1 x 6") constant 200 mm (1 x 8") constant
directivity Dual Concentric™ directivity Dual Concentric™
Amplifier
Maximum output power* 1600 W 1600 W
Type Class-D Class-D
Protection Output current limiter, Output current limiter,
clip limiter, brownout clip limiter, brownout
protection and protection and
recovery, thermal recovery, thermal
Connectors
Input 1 x XLR, balanced 1 x XLR, balanced
Input impedance 10 kΩ unbalanced, 10 kΩ unbalanced,
20 kΩ balanced 20 kΩ balanced
Maximum input level +4.5 dBu (hard clip at +4.5 dBu (hard clip at
for clip +14.5 dBu input signal) +14.5 dBu input signal)
Link 1 x XLR 1 x XLR
Mains Supply Neutrik powerCON 20A† Neutrik powerCON 20A†
Controls
Level Recessed potentiometer Recessed potentiometer
Filter Hi-pass (HPF)/ Hi-pass (HPF)/
full range (FR), switchable full range (FR), switchable
Power mode Manual (MAN)/ Manual (MAN)/
auto (AUTO), switchable auto (AUTO), switchable
Power Supply
Type Switch-mode autorange Switch-mode autorange
power supply power supply
Mains voltage 100-240 V~, 50/60 Hz 100-240 V~, 50/60 Hz
Power consumption 60 W @ 1/8 max power 75 W @ 1/8 max power
VXP 8 (-WH) VXP 12 (-WH) VXP 15HP (-WH)
70 Hz - 25 kHz ±3 dB 60 Hz - 25 kHz ±3 dB
55 Hz - 38 kHz -10 dB 47 Hz - 30 kHz -10 dB
100 Hz - 25 kHz ±3 dB 100 Hz - 25 kHz ±3 dB
80 Hz - 38 kHz -10 dB 80 Hz - 30 kHz -10 dB
90° conical @ -6dB point 75° conical @ -6dB point
9.6 9.7
9.8 9.9
106 dB 106 dB
129 dB peak 131 dB peak
Passive 1 kHz with Passive 1.3 kHz
HF protection
305 mm (1 x 12") constant 380 mm (1 x 15") constant
directivity Dual Concentric™ directivity PowerDual™
1600 W 1600 W
Class-D Class-D
Output current limiter, Output current limiter,
clip limiter, brownout clip limiter, brownout
protection and protection and
recovery, thermal recovery, thermal
1 x XLR, balanced 1 x XLR, balanced
10 kΩ unbalanced, 10 kΩ unbalanced,
20 kΩ balanced 20 kΩ balanced
+4.5 dBu (hard clip at +4.5 dBu (hard clip at
+14.5 dBu input signal) +14.5 dBu input signal)
1 x XLR 1 x XLR
Neutrik powerCON 20A† Neutrik powerCON 20A†
Recessed potentiometer Recessed potentiometer
Hi-pass (HPF)/ Hi-pass (HPF)/
full range (FR), switchable full range (FR), switchable
Manual (MAN)/ Manual (MAN)/
auto (AUTO), switchable auto (AUTO), switchable
Switch-mode autorange Switch-mode autorange
power supply power supply
100-240 V~, 50/60 Hz 100-240 V~, 50/60 Hz
120 W @ 1/8 max power 150 W @ 1/8 max power
Enclosure
Dimensions (HWD) 334 x 226 x 216 mm 389 x 281 x 276 mm
(13.1 x 8.9 x 8.5") (15.3 x 11.1 x 10.9")
Net weight 7.2 kg (15.9 lbs) 10.1 kg (22.2 lbs)
Construction 12 mm (1/2") plywood, 15 mm (5/8") plywood,
vented and internally braced vented and internally braced
Finish Semi matt black paint Semi matt black paint
(white optional) (white optional)
Grille Powder coated Powder coated
perforated steel perforated steel
Flying hardware 2 x M6 yoke bracket inserts 2 x M10 flying inserts
Blanking plate for optional 2 x M10 yoke bracket
VTH pole mount inserts (6 mm allen key)
Blanking plate for optional
VTH pole mount
Accessories
Yoke Horizontal VX5.2/VX6 Yoke Horizontal VX8
Yoke Horizontal VX5.2/ Yoke Horizontal VX8 - WH
VX6 - WH
VTH Top Hat Yoke Vertical VX8/VX8.2
Yoke Vertical VX8/VX8.2 - WH
VTH Top Hat
*independent of limiters and driver protection circuits
†Neutrik and powerCON speakON are registered trademarks of Neutrik AG.
†Only qualified personnel are allowed to modify the AC-Main cord and to adhere to all applicable national standards.
41
Quick Start Guide
487 x 371 x 361 mm 591 x 451 x 421 mm
(19.2 x 14.6 x 14.2") (23.3 x 17.8 x 16.6")
19.0 kg (41.9 lbs) 27.3 kg (60.1 lbs)
15 mm (5/8") plywood 18 mm (3/4") plywood,
(enclosure) and 18 mm (3/4") vented and internally braced
plywood (front), vented and
internally braced
Semi matt black paint Semi matt black paint
(white optional) (white optional)
Powder coated Powder coated
perforated steel perforated steel
8 x M10 flying 8 x M10 corner flying inserts
inserts (portrait or 8 x M10 yoke bracket inserts
landscape mounting) 1 x Integrip carrying handles
8 x M10 yoke bracket inserts Blanking plate for optional
1 x Integrip carrying handles VTH pole mount
Blanking plate for optional
VTH pole mount
Yoke Horizontal VX12 Yoke Horizontal VX15
Yoke Horizontal VX12 - WH Yoke Vertical VX15
Yoke Vertical VX12/VX12.2 VTH Top Hat
Yoke Vertical VX12/
VX12.2 - WH
VTH Top Hat