Descargar Imprimir esta página

Ryobi RY40HF02 Manual Del Operador página 7

Ventilador de piso híbrido de 40 v de 355,6 mm (14 pulg.)

Publicidad

Idiomas disponibles

Idiomas disponibles

HANGING THE PORTABLE FAN WITH THE
MOUNTING HOLE
See Figure 5, page 9.
NOTE: Be careful not to hang the fan in such a way that it
prevents normal fan operation or damages the cord.
 Use a #12 x 3 in. minimum screw size for mounting the
fan.
 Ensure that the screw is securely fastened into a stud.
 Slide the mounting hole, located on the frame, over the
screw. Make sure the fan is securely mounted.
WARNING:
When servicing, use only identical replacement parts.
Use of any other part could create a hazard or cause
product damage.
NOTE: ILLUSTRATIONS START ON PAGE 8
AFTER FRENCH AND SPANISH LANGUAGE SECTIONS.
OPERATION
ADJUSTABLE HEAD
See Figure 5, page 9.
To change the angle of the fan head, loosen the adjustment
knob on each side of the fan head. Select the desired posi-
tion and tighten each knob to secure.
NOTICE:
Adjusting the fan head without loosening the adjustment
knobs could result in damage to the fan.
MAINTENANCE
GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and can be damaged by their use. Use
clean cloths to remove dirt, dust, oil, grease, etc.
7 – English

Publicidad

loading