Lindy 43394 Manual Del Usuario página 5

User Manual
Insert the M.2 SSD* diagonally into the NVMe slot and gently press down the M.2 SSD.
Use the Mini Screwdriver to lock the M.2 SSD.
Finally use the included USB4 Flat Cable to connect the Enclosure with your host computer. The USB4
NVMe M.2 SSD Enclosure is now ready for operation.
Please note:
1. Please be careful to prevent static electricity when using this enclosure and installing the M.2 SSD.
It is recommended to put your hands on a metal object to discharge.
2. Make sure that the enclosure is powered off when you install the M.2 SSD (although it supports
hot-swapping).
3. Try to move gently and do not press violently to avoid scratching the components on the
motherboard of the M.2 SSD during installation.
4. The enclosure is recommended to be used on Windows 10/11, macOS 10.9 or higher for best
performance.
*If you are using a new M.2 SSD, it must first be initialized, formatted and partitioned.
English