Blackstone 2147EU Manual Del Propietário página 6

OWNER'S MANUAL | ASSEMBLY GUIDE
❶ ❶ Use one (1) large thumb screw
STEP 02
lizing shelf to the right leg assembly�
❷ ❷ Use one (1) medium thumb screw
shelf to the left leg assembly�
Note: This shelf is integral to the stability of the appliance
while in use�
❶ ❶
loosen the two (2) M6x12 screws on the right side of the
STEP 04
griddle body�
Hook one (1) side shelf on these screws and use two (2) M6x12
screws [b.] to secure the side shelf to the right side of the griddle
body� Tighten all four screws�
Repeat with the left side of the griddle body�
Make sure the front pins are fully
seated in the holes, then push
the griddle top forward to lock
the griddle in place�
Make sure the front pins are
seated in the holes, then push
the griddle top back�
06
[d.] to attach the stabi-
[e.] to attach the stabilizing
❷ ❷
With the help of another person, pick up the griddle body
STEP 03
and set it on its wheels�
Install the two (2) control knobs
the oFF position�
Hang the grease cup in the slot at the back of the
STEP 05
griddle body�
With the help of another person, place the griddle top and hood on
the main body by aligning the 4 pins to the holes of the body�
Make sure the front pins are fully
seated in the holes, then push
the griddle top forward to lock
the griddle in place�
Make sure the front pins are
seated in the holes, then push
the griddle top back�
Model: 2147eU
[a.] by pushing them into place in
BLACKSTONEPRODUCTS.COM/SUPPORT SUPPORT BLACKSTONE EUROPE.COM