OLI MVE Serie Manual De Instrucciones página 13

In accordance with machinery directive 2006/42/EC, the above-mentioned range of external motovibrators are identified as 'PARTLY-
COMPLETED MACHINERY' .
"B" Type:
» These products are built in accordance with directive 2006/42/EC and SUBSEQUENT AMENDMENTS.
» These products must not be put into service until the final machine in which they are to be incorporated has been
declared compliant with the provisions of this Directive as required.
» The protection requirements of directive 2014/35/ EU have been met with reference to appendix I No 1.5.1 of
machinery directive 2006/42/EC
In accordance with annex IIB of machinery directive 2006/42/EC, the following essential safety and health requirements are applied and
complied with:
1.1.1. - 1.1.2. - 1.1.3. - 1.1.5. - 1.3.1. - 1.3.2. - 1.3.3. - 1.3.4. - 1.3.7. - 1.3.8. - 1.3.9. - 1.4.1. - 1.5.1. - 1.5.2. - 1.5.4. - 1.5.5. - 1.5.6. - 1.5.7 - 1.5.8. - 1.6.1. - 1.6.4. - 1.7.1.
- 1.7.2. - 1.7.3. - 1.7.4. - 1.7.4.1. - 1.7.4.2. - 1.7.4.3.
The relevant technical documentation has been filled out in accordance with annex VII B. OLI S.p.a. undertakes to send by mail or e-mail,
in response to a reasoned request by the national authorities, relevant information on the products covered by this declaration, without
prejudice to the intellectual property rights of the manufacturer. The information will be transmitted directly to the national authority that
requested it.
The technical documentation is held by OLI SpA, Via Canalazzo, 35 – 41036 Medolla (MO) Italy
Medolla 22/02/2019
DECLARATION OF INCORPORATION
Giorgio Gavioli
(the Legal Reppresentative)