VEVOR S0900915D Manual De Usuario página 8

together.
9. JOINING 2 ROLLS ELECTRICALLY
To join one roll of standard netting to the
next to provide an electrical connection,
simply slide the built-in, stainless-steel
male/female "power" connectors together
by hand at one end. Do not use pliers to
force them.The 2 pieces of metal only
need to make and maintain contact.
11. CHECKING VOLTAGE
Never put animals into an electric fence enclosure without first checking for adequate
voltage with an electric fence tester. Touch the fence tester to the clip at the end of the
fence. Testers with ground probes will need their probe inserted into the ground, prior to
contacting the fence. Voltage on a newly installed fence should exceed 3,000v. As time
passes, grass will grow and touch the fence, causing the voltage to drop. Never allow it to
drop below 2,000ν.
10. CONNECT ENERGIZER TO STANDARD
NET
To electrify, install a ground rod and use
jumper clips to connect the net to an energizer
or to an existing electric fence.For either a
battery (DC) or plug-in (AC mains) energizer,
attach the lead wire from the fence terminal on
energizer top clip at one end of the net.
6