Linksys XAC Serie Guia Del Usuario página 102

Linksys XAC-Series Linksys XAC-Series
Your Internet cable is not plugged in
message
If you get a "Your Internet cable is not plugged in" message when trying to set
up your router, follow these troubleshooting steps
To fix the problem, try the following:
1. Make sure that the Ethernet end of the split cable of the APM105 ADSL2+
Power Modem is securely connected to the yellow Internet port on the
back of the router
Back view of router
APM105 ADSL2+ Power Modem
Ethernet Cable
2. Make sure that your APM105 ADSL2+ Power Modem is connected to
power and the DSL phone line
3. Install the router again
All manuals and user guides at all-guides.com
Cannot access your router message
If you cannot access your router because your computer is not connected to
your network, follow these troubleshooting steps
To access your router, you must be connected to your own network If you
currently have wireless Internet access, the problem may be that you have
accidentally connected to a different wireless network
To fix the problem on Windows computers, do the following:
1. On your Windows desktop right-click the wireless icon in the system tray
2. Click Open Network and Sharing Center A list of available networks
The icon might differ depending on your version of Windows Windows
7 is represented below
will appear
Troubleshooting
10 10