Portamate PM6700 Manual Del Operador página 4

Step 2. Assemble back corners
1. Bolt 3" wheel to base using part K, Q, & T
Step 3. Assemble side tubes
1. Bolt side tube between the front and back right corners using 4x part G
2. Bolt the tube out of the side of the front and back corner using 2x part G each
x 2
6
Step 4. Slide the machine onto the base
1. Slide your machine onto the mobile base before connecting the remaining corners
Step 5. Connect the remaining corners
1. Bolt side tube between the front and back right corners using 4x part G
2. Slide the left assembly onto the front and back rail – bolt it together using 4x part G
7