Publicidad
ENGLISH
4. OPERATION
Fig.2
1. Unlock button
Press this button for 2 seconds to unlock the device.
2. On/Off and temperature unit selection button
Press the power button briefly to turn the device on or off. Press and hold this button
to change the temperature unit of measurement between Fahrenheit and Celsius.
3. Temperature increase/decrease button
Auto lock functionThe device will automatically lock after 20 seconds if the user does
not press any button. When locked, the up/down buttons cannot be used but the
unlock button and on/off button can be used.
Automatic-locking function
The device will lock automatically after 20 seconds if the user does not press any
button. After locking it, the increase/decrease buttons cannot be used but the
unlocking and power button can operate normally.
Auto light off function
After 10 minutes of inactivity, the light will automatically turn off.
Adjustable range
Minimum value: 5 ºC/41 ºF Maximum value: 18 ºC/ 64 ºF
Display range
Control panel's temperature display range: 0~37 ºC/32~99 ºF
The temperature measured by the temperature sensor will be displayed ±1 oC (if the
user has selected Celsius as the temperature unit) and ±2 oF (if Fahrenheit) from the
set temperature.
Error code
EE: "EE" will be displayed when the temperature sensor short-circuits or it is
disconnected. It will flash and the refrigeration will stop.
LL: When the temperature sensor measures a temperature lower than 0 oC, "LL" will
be displayed flashing and the cooling will stop.
HH: When the temperature sensor measures a temperature higher than 37 oC, "HH"
17
EVVO VINOTECA VT15 COMPRESSOR
Publicidad
