Vaporfi ROCKET 3 Manual De Instrucciones página 4

USING DEVICE:
To turn on the Rocket 3, click the power button five times continuously. You will do
the same in order to turn the device off as well. If the device does not turn on, you
must use a USB charger to charge the device. Once the battery has fully charged,
screw the atomizer base, with tank, onto the battery. Click the power button five
times to turn the battery on. Hold the power button while inhaling from the drip tip,
then release the power button once the desired vapor production is achieved.
Note: If you hold the button for more than 10 seconds, the output will shut off
automatically and the button light will blink red eight times.
LED INDICATOR LIGHT:
When using the Rocket 3, you will notice that when the button is pressed the
indicator light will be a certain color based on the wattage or temperature that you
are using. Press the power button three times simultaneously to change your setting.
The red light indicates that the device is firing at 30W/400F, white fires at
40W/500F, and green fires at 50W/600F. The device will automatically make the
distinction between temperature control and wattage, based on the atomizer you
are using.
4
www.vaporfi.com