Settings - Clarion CMS4 Manual De Instrucciones Y Manual De Instalación

Settings

You can customize the various settings of this unit
from the Settings screen.
When in Standard mode, press the [ ] button to
access the Home screen, rotate the [MENU] knob
to select the Settings option, then press the [MENU]
knob to access into the Settings Mode. You can
rotate the [MENU] knob to select the options, then
press the [MENU] knob to confirm.
Note: Press and hold the [MENU] knob to
quickly access the Settings menu. This is the only
way to access the Settings menu when using the
Multi-Zone mode.
¡ Audio Settings
Press and hold the [MENU] knob to enter Settings
menu. Rotate the [MENU] knob to select items to
be adjusted:
● Preset EQ
1. Rotate the [MENU] knob to change the EQ:
FLAT -> JAZZ -> POP -> CLASSIC -> ROCK
-> NEWS -> URBAN -> RAVE -> MOVIE ->
TECHNO -> USER
2. When USER EQ is selected, press the
[MENU] knob to cycle through each of the
7 EQ bands and rotate the [MENU] knob to
adjust each band.
● Balance
Rotate the [MENU] knob to adjust the Balance
between the right and left speakers from R12
(full right) to L12 (full left).
● Fader (Standard Mode Only)
Rotate the [MENU] knob to adjust the Fader
between the front and rear speakers from R12
(full rear) to F12 (full front).
10
CMS4
● Crossover
1. Press the [MENU] knob to turn On or Off the
Crossover function.
2. Press the [MENU] knob to access the Front
HPF menu, and rotate the [MENU] knob to
select the below items to adjust:
SLOPE - Press the [MENU] knob to change
the value: 12dB / 24dB
FREQUENCY - Press the [MENU] knob
to change the value:
60Hz/80Hz/120Hz/ALL
LEVEL - Press the [MENU] knob to highlight
and rotate it to adjust the level
between 0 ~ 20.
● Loudness
Press the [MENU] knob to set Loudness to ON
or OFF.
● Source Gain
Press the [MENU] knob to access the Source
Gain menu, and rotate the [MENU] knob to
select the items, then press the [MENU] knob
to change the value:
FM TUNER -> AM TUNER -> WB TUNER ->
USB/iPod -> BLUETOOTH -> PANDORA ->
SIRIUSXM -> AUX
¡ System Settings
Press and hold the [MENU] knob to enter Settings
menu. Rotate the [MENU] knob to select items to
be adjusted:
● Dimmer
Press the [ MENU ] knob to adjust the LCD
display backlight level between High or Low.
● Theme
This option allows the user to select theme for
the LCD display. Auto is the default setting and
is triggered through the dimmer wire on the
CMS4 black box unit. Press the [ MENU ] knob
to toggle between Day, Night or Auto.
● Screen Saver
Press the [MENU] knob to toggle the screen
saver mode: Clock/Slide Show/Off.
Screen saver will be enabled after
[30/60/90/120] seconds of no device operation
Settings
● LED Color
This unit is equipped with user configurable
color LED. Once in the LED COLOR menu,
rotate the [MENU] knob to select the LED
Color. Press the [MENU] knob to complete the
LED COLOR selection.
● Beep
Press the [MENU] knob to select between
ON and OFF.
● Time
Press the [MENU] knob to enter clock setting
mode. Use the [MENU] knob to set the clock,
then press the [ ] button to confirm.
● Time Format
Press the [MENU] knob to choose a time
format: 12H or 24H.
● Camera Audio
Press the [MENU] knob to enter Camera Audio
menu, rotate the [MENU] knob to select:
YES - The Aux audio is played while the
Camera image is shown the display controller's
screen. This will cause the Aux source to
become unavailable as an audio playback
source.
NO - The auxiliary audio input is not utilized
while displaying the camera image on the
display controller's screen.
● Tuner Region
Press the [MENU] knob to enter the
Tuner Region
menu, rotate the [MENU] knob to select the
region: "EUROPE", "NORTH AMERICA",
"ASIA" or "AUSTRALIA"
● Audio Mode
Press the [MENU] knob to enter the Audio
Mode screen, rotate the [MENU] knob to select
Standard or Multi-Zone mode.
● Factory Reset
Select between SiriusXM or System restore
then press the [MENU] knob to execute.
¡ Bluetooth Settings
Press the [MENU] knob to enter the Bluetooth
Settings menu. Use the [MENU] knob to select the
items:
● Auto Connect
Press the [MENU] knob to change the
Bluetooth auto connect On or Off:
ON - If the paired device is within range, the
system reconnects automatically.
OFF - Bluetooth devices will need to be
reconnected manually.
● Device Name
Press the [MENU] knob to view the name
of the CMS4 device as it appears to other
Bluetooth devices.
¡ Info Settings
Press the [MENU] knob to view the system
version information.
CMS4
11