Publicidad
Idiomas disponibles
Idiomas disponibles
36013-05-KRC 447
GB
Make sure that the plug is not inserted when assembling the device.
This basic appliance must be attached for example to a wall cupboard with the sup-
plied screws.
Attention! If other screws are to be used because the wall is not thick enough,
these screws may break through the cabinet in certain circumstances!
1. Insert the plug into a properly installed 230 V, 50 Hz earthed socket.
2. Shift the POWER switch to ON.
3. Select the desired frequency band with the BAND selector
UKW = FM, MW = AM.
4. By turning the TUNING knob, the desired radio station can be selected. The
tuned radio station will be displayed on the tuning scale.
5. The volume can be adjusted with the VOLUME knob.
6. Switch the radio off by pressing the POWER button again.
1. Press the HOUR button. When the desired hour appears on the display, release
the button.
2. Press the MINUTE button. When the desired minutes appear on the display,
release the button.
The clock is now set.
Pull the mains plug out of the socket before cleaning this unit.
Marks on the outside can be wiped off with a slightly damp cloth - there is no need
to use an additives.
This appliance conforms with the CE directives for radio interference suppression
and low-voltage safety and has been built to meet current safety requirements.
Subject to technical changes without prior notice!
We undertake to guarantee the appliance sold by our company for 24 months as of
the date of purchase (cash receipt).
During the life of the warranty we shall provide for the repair or replacement of the
appliance owing to material or manufacturing defects absolutely free of charge.
6
07.10.2002 12:13 Uhr
Assembly
Putting into Operation
Setting the Clock
Cleaning and maintenance
Warranty
Seite 6
Publicidad
