Clatronic MRC 460 P Instrucciones De Servicio/Garantía página 8

38966-05-MRC 460 P
GB
Radio station tuning
Shift the function switch (6) to the ON position and select the desired frequency
with the band selector (13). FM = UKW, AM = MW.
Choose the desired station by turning the TUNING knob (13). The tuning scale (4)
indicates the selected frequency.
Setting of the Clock
Hours: Press the TIME key (9) and the H key (11) simultaneously.
Minutes: Press the TIME key (9) and the M key (12) simultaneously.
Setting of the Alarm
Hours: Press the ALARM key (3) and the H key (11) simultaneously.
Minutes: Press the ALARM key (3) and the M key (12) simultaneously.
Shift the function switch (6) to the AUTO position to activate the alarm function. A
red LED lights up on the LED display (5). When the BUZZER position is selected, a
buzz signal will be emitted instead of the selected radio station when the alarm
rings.
Projection
With this device you can project the time on the wall or on the ceiling. Shift the
PROJECTION switch (6) to the ON position. You can swing the projector (8) either
to the front or backwards. On the rear of the projector there is a setting knob, which
you can use to adjust the sharpness of the projected display.
The projector clock is to be set separately from that of the device. Use the keys on
the rear of the projector.
Hours: Press the TIME key and the HOUR key simultaneously.
Minutes: Press the TIME key and the MIN key simultaneously.
Automatic Alarm Interval
The automatically set alarm function can be shut off for approximately 9 minutes
with the SNOOZE key (7). After approximately 1 hour the alarm function is shut off
completely until the next day.
Delayed Shut-Off
By pressing the SLEEP key (2) the radio is switched on for 59 minutes.
The switch on time can be set with the M key (12).
This function can be cancelled with the SNOOZE key (7).
8
17.07.2003 16:37 Uhr
Putting into function
Seite 8