Descargar Imprimir esta página

LG UltraGear 27GQ40W Manual De Usuario página 27

Ocultar thumbs Ver también para UltraGear 27GQ40W:

Publicidad

On Installation
Do not allow anything to rest upon or roll over the power cord, and do not place the display where the power
cord is subject to damage.
Do not use this display near water such as near a bathtub, washbowl, kitchen sink, laundry tub, in a wet
basement, or near a swimming pool.
Displays are provided with ventilation openings in the cabinet to allow the release of heat generated during
operation. If these openings are blocked, built-up heat can cause failures which may result in a fire hazard.
Therefore, NEVER:
Block the bottom ventilation slots by placing the display on a bed, sofa, rug, etc.
y
y
Place the display in a built-in enclosure unless proper ventilation is provided.
y
y
Cover the openings with cloth or other material.
y
y
Place the display near or over a radiator or heat source.
y
y
Do not rub or strike the Active Matrix LCD with anything hard as this may scratch, mar, or damage the
Active Matrix LCD permanently.
Do not press the LCD screen with your finger for a long time as this may cause some afterimages.
Some dot defects may appear as Red, Green or Blue spots on the screen.
However, this will have no impact or effect on the display performance.
If possible, use the recommended resolution to obtain the best image quality for your LCD display. If used
under any mode except the recommended resolution, some scaled or processed images may appear on
the screen. However, this is characteristic of the fixed-resolution LCD panel.
Displaying a still image for long time on the monitor may leave persistent image or stain on the monitor
screen. To avoid this problem, use a screen saver and power off when this product is not used. Persistent
image or stain caused by long time usage are not covered by the warranty on this product.
Do not shock or scratch the front and sides of the screen with metallic objects.
Otherwise, it may cause damage to the screen.
Make sure the panel faces forward and hold it with both hands to move. If you drop the product, the
damaged product can cause electric shock or fire. Contact an authorized the service center for repair.
Avoid high temperatures and humidity.
Do not install this product on a wall if it could be exposed to oil or oil mist.
This may damage the product and cause it to fall.
y
y
For displays with glossy bezels the user should consider the placement of the display as the bezel may
cause disturbing reflections from surrounding light and bright surfaces.
Do not use products using high voltage around the Monitor. (ex. Electrical Swatter)
Monitor may have malfunction as its electrical shock.
y
y
Precautions to the AC Adapter and Power
If water or any foreign substance goes inside the product (TV, monitor, power cord, or AC adapter),
disconnect the power cord immediately and contact the service center.
Otherwise, this may cause a fire or electric shock due to damage to the product.
y
y
Do not touch the power plug or AC adapter with wet hands. If the pins of the plug are wet or dusty, wipe and
dry them before use.
Otherwise, this may cause a fire or electric shock.
y
y
Important precautIons
2

Publicidad

loading