Volvo Wallbox Guia De Inicio Rapido página 14

3. Select the Wallbox from the list of available WiFi
devices using the WiFi code (SSID) from the access
data letter.
4. Establish a connection with the selected Wallbox.
If a connection could not be established, see
Assembly and installation instructions, section
Commissioning: No connection to web app estab-
lished via WiFi.
5. Enter the WiFi password for the Wallbox (network
key) from the access data letter.
6. When the connection has been established suc-
cessfully, open the web browser.
7. Enter the host name of the Wallbox from the
access data letter in the address bar. The login
area is displayed in the web app with a login
option.
Note
When accessing the web app, the web browser
may display a warning stating that the page
poses a security risk or that a secure connection
cannot be established (depending on the
browser). Depending on the web browser, the
12
"Advanced" button can be used to enable access
to the web app via an additional button or link.
8. Select standard user as the user role.
Note
System settings can only be made as the
Service user, see operating instructions.
9. Enter the password for the standard user (from
access data letter).
After a successful login, the Overview is dis-
played.
There are now two quick start options for charging the
vehicle:
Access protection remains disabled, vehicle is
l
charged without authentication, see Charging a
vehicle without authentication
Enable access protection and register the RFID
l
chip, see Registering the RFID
(Free-Charging).
chip.